158-1189-8618
技術參數
★ 数码信号类型:DMX512,以及采用RS—485接口传输的数码信号
★ 1路信号输入,1路直通信号输出(信号输入与直通信号之间有经电气隔离)
★ 8(或4)路经电气隔离的信号分配输出
★ 接口类型:RS-485
★ 信号连接插座:输入XLR-3-M, 输出XLR-3-F
★ 输入对输出的电气隔离耐压:>AC300V
★ 供电电源:AC90V~240V, 50Hz / 60Hz ,15W
★ 尺寸: 484*45*140mm “19”1U
★ 重量:1.9kg
◆1 input and 8 outputs dmx signal
◆In-out signal transmission completely isolated with photoelectric isolation
◆Interface: RS-485 ◆Signal connection socket: XLR-3-M(input),XLR-3-F( output)
◆Power supply: AC90V~240V, 50Hz / 60Hz , 15W .
DMX-8(或DMX-4)數碼信號分配放大器專用于對DMX512數碼燈光控制信號進行整形放大和8(或4)路分配輸出,各輸入接口采用高壓隔離技術,適用于DMX512信號經距離傳輸衰減後的整形放大處理,以及各分配輸出接口之間、輸入接口與各分配輸出接口之間需要完全的電氣隔離的使用場合。由于各個接口之間互相獨立隔離,因此可以避免因控制線路、電腦燈、矽箱等問題而燒毀精密的數碼燈光控制台,確保數碼燈光控制台的安全運行,同時也保證 DMX信號能正常傳送至各種燈光設備,從而提高整個數碼燈光控制系統的可靠性。
DMX-8 or DMX-4 signal splitter is specialize in distributing and amplifying the DMX512 signal to output in 4ways and 8ways.Adopting high voltage isolation technology in each input port ,it’s suitable for amplifying the DMX512 signal after the long distance transmission and where need complete electrical isolation between in-output interface with output interface .Due to between the input and the output are completely isolated, so it can avoid burning the precision digital DMX controllers from the control cable broken in the lighting equipment and dimmer pack to ensure the safely running. At the same time, it also can be sure that there is the enough strong signal transmitted to every lighting equipment so that advanced the reliability of the whole lighting controlling system.